Large Size 3X6m Plasma Cutting Machine R-3060 Delivery to Europe

3X6m Plasma cutting machine R-3060 delivery to Europe 

Two seperate parts connected together to make sure can load into container well
R-3060 table working size 3000mmx6000mm but this size it too big to load into 40ft container (40ft container inside width 2300mm)
So we make special drawing to make the machine two parts with width 1500mmx6000mm and at middle connect by screws strongly.

---

The main other features are:

1. The rack is fully welded, solid and reasonable, simple and durable.

2. Plasma cutting machine Y axis adopts double moters with double drivers. XYZ axis round raill,      moving smoothly, with high accuracy. (Option:squar raill)

3. Independent research the water cooling system to ensure that the materials smooth deformation of incision.

4. High configuration. Automatic THC/ARC, stable performance, arc success rate of 99% or more.

5. Support Fastcam software such as the standard G code path generated file can also be read by software conversion software such ad AUTOCAD generated DXF formats. 

6. U disk exchange control system processing files, easy to operate

7. Our plasma cutting machine is with three torch 60A+200A+marking functions 
If you have interest in this machine welcome to contact us at anytime please~!!
 

Working Area	1300x2500mm/1500*3000mm/2000x3000mm(size can be customized)
Working material	Iron, steel, aluminum, sheets, galvanized sheets, titanium plates
Cutting thickness	0.5-40mm
Cutting speed	0-8000mm/min
Control system	Beijing Starfire control system(The updated controller)
Control software	Starcam
Drive system	Stepper /Servo
Input voltage	220V / 380V - 50HZ
Plasma power	63A(100/120/160/200A for option)
Files transfer	USB interface
Arc	Untouched arc  striking
File format	G-code
Plasma source	Huayuan or Hypertherm(depend on you)