This is our small high accurate 1500w fiber metal laser cutting machines for metal high precision cutting on gold silver copper brass aluminum steel etc that mainly used in jewellery business and other high accuracy industry.
Now this machine price for sale.

Application Industry:

It is widely used in high precision cutting and drilling usage in various metal sheets, such as
Hardware, Consumer Electronic Components, Various Instruments, Precision Machinery, Glasses, Jewelry, Sheet Metal Processing industry, etc

Application business:

Electronic Factory, Jewellery ,Building Material Shops, Machinery Repair Shops, Printing Shops, Advertising Company


Application materials:

Carbon steel,
stainless steel,
galvanized steel,
aluminum alloy,
titanium alloy,
gold,
silver,
aluminum,
brass,
copper tight sheet metal accessories and other metal materials

Main Characteristics of fsmall laser cutting machine RF-6060-1500

Machine main components

R-6060-1500 Laser cutting head
1. Fiber laser cutting head,which has Z axis follow-up function. Highly sensitive and follow-up cutting head applies capacitance sensor monitoring, offering automatic adjusting function with stable and fast cutting.
2. All kinds of matching design of nozzle are applied to lens with many focuses and can also be equipped with optical lens with different focuses.
3. The focus and nozzle can be adjustable flexibly, including adjusting lens on X-Y direction and nozzles on the same axis. 

Control Box
The control box of fiber laser cutting machine RF-6060-1500 is configured separately to reduce interference and easy to maintain.
To ensure the stability and avoid signal interference，we use the following measures based on electrical technology 
1. The main circuit and control circuit are connected by wires separately bypass.
2. The wire of main controller use shielded or twisted wire.
3. The connection of motor and driver use separate outlet to avoid parallel with other wires.
4.  I/O interface chip、controller、sensor and the connector are as close as possible.5. The connect wire between upper and lower equipment use the Aerial plug connector and Weidmuller terminal block.

Safety Protection System
1. Laser module protection
2. The laser module have warning sign to introduce the laser out avoid harm from direct laser；
3. The cover have ground connection to avoid hurt from leakage.
4. The operator need to wear suitable laser protection glasses throughout the operation；
5. Make sure the protection equipment have no wear and tear before operating； 
6. Do NOT look the laser out head at any time when the device is powered；   
                                                         
External Transmission fiber Protect section
1. The workstation of external transmission fiber ，use imported high quality guide pulley and Limit device to fix and guide laser cable；
2. The transmission fiber have protective cover made of special laser protection material to prevent the laser leak；
3. The protective cover of transmission fiber have leak sensor,if the fiber fractured to cause the laser leak,the sensor will transmit the signal to control center immediately,then the control center will stop the laser equipment and alarm.

RF-6060-1500 Main Parameters:

Different material cutting thickness list
Zincoat Sheet / Gold ,Silver/ Brass/ Copper 

Thickness(mm)	speed(m/min)	Pressure(Mpa)	Gas	Height(mm)
0.5	17-18	1	N2	0.6
1	15-17	1.1	N2	0.6
2	4-4.5	1.5	N2	0.6
3	1.5-1.7	0.4	N2	0.6
4	0.8-0.9	0.15	N2	0.6

Carbon Steel 

Thickness(mm)	speed(m/min)	Pressure(Mpa)	Gas	Height(mm)
1	10-12	1	O2	1
2	5-6	0.5-0.8	O2	1
3	2-2.5	0.25-0.4	O2	1
4	1-2	0.15-0.2	O2	1
5	1-1.2	0.15-0.2	O2	1
6	1-0.8	0.1-0.15	O2	1
8	0.8-0.9	0.1-0.15	O2	1
10	0.6-0.65	0.1-0.15	O2	1
12	0.6-0.65

Aluminum

Thickness(mm)	speed(mm/s)	Pressure(Mpa)	Gas	Height(mm)
1.5	120-130	1.1	N2/Air	0.8
2.5	60-70	1.1	N2/Air	0.8
3	30	1.1	N2/Air	0.8
4	10	1.1	N2/Air	0.8

 

---

 

Rhino small metal laser cutting machine detailed photo show 

---

Gold cutting 1.2mm popular used in Jewelry business
 

---

Machine package and delivery 

Since this model RF-1530-750 package width 2.3meter we only can put it on the wooden pallet but we will tight it perfectly and fix it well inside of container so no need any worry about the transportation no matter by sea or by train.

---

FAQ
Q1,What is warranty and service you have?
A:Machine warranty 2 years for free and long life time serice and we have professional engineers who are responsible for service. We offer online/telephone/email service 7x24 hours.
We have online talking group in WhatsApp and Wechat with engineers and customers 
Q2,How can I confirm machine specifications?
A:Firstly we need to know the working size you need and what is materials you want to cut also if you have your own requirements let me know at anytime please
Q3,What is software of machine you use?
A:We use Cypuc standard version that professional for thick metal cutting solution perfectly
Q4,Do you offer training for the softwares?
A:Yes, we have engineer who work this two softwares so you can come our factory or we send them to your company to give you training 
Q5,Could you customized this fiber laser cutting machine as per our detail requirement?
A:Yes, you give us all your detail requests and we make agreement then start machine productime 

---

We have two workshops one for cnc router production and another for laser cutting machine production.
Every month export more than 100 machines to different countries like India.Thailand,Europe and America etc 
Now we are looking for more agents in whole world and win-win together in globe market.