By Nina wong | 30 March 2023 | 0 Comments
Syntec 60WE 60CB Application in Rhino ATC CNC Machines
Syntec 60WE / 60BC operation process in Rhino ATC CNC Machine/ ATC CNC Routers
1. Setting of workpiece centering coordinate system in ATC CNC Machine :
Machine setting → Set workpiece coordinate system → Left and right keys
Set the workpiece coordinate system (F5) → Centering function (F5) → Press F1 (PX1) when the tool touches the workpiece edge in the (- X) direction → Press F2 (PX2) when the tool touches the workpiece edge in the (+X) direction → Press F3 (PY1) when the tool touches the workpiece edge in the (- Y) direction → Press F4 (PY1) when the tool touches the workpiece edge in the (+Y) direction → Left function key → G54 → Auxiliary automatic setting (F3) → Confirm (F1).
2. Inspection G54
Centering function (F5)
For G54 Z-axis
Mechanical coordinate automatic setting (F1) → OK (F1).
Set Z-axis offset
Enter a numeric value → ENTER.
3. Positioning coordinates at a certain point in ATC CNC Machine RSKM25-H:
Move the cursor to G54X → Automatic setting of mechanical indicators (F1) → OK (F1).
Move the cursor to G54Y → Automatic setting of mechanical indicators (F1) → OK (F1).
4. Return to the original point:
Move Z - X+Y+
5. Transfer procedure:
Program editing (F2) → File management (F5) → Disk drive input → Left and right cursor keys → ENTER → OK (F1).
6. Adjustment procedure:
Cursor movement → ENTER → Left and right keys → Execute machining → Automatic execution (main function area) → Manual simulation → Start.
7. Processing parameter setting:
Find breakpoint line number → Execute machining → Processing parameters → Enter numerical value → ENTER → Manual simulation → Start → Confirm (F1).
Manual Data Input (MDI)
8. Procedure:
1). Turn the mode knob to "MDI"
2). Press the following function key "Execute machining"
3).Press the function key "MDI input" several times
4).The MDI input dialog box will appear on the screen
5). Enter the desired program line and press the "MDI" key
6). Press "Start" on the second operation panel to run the current single program
"If the current single section program syntax is incorrect, the program will disappear from the screen as the program executes.".
7). MDI coordinate reset
8). Networking Settings
Parameter setting (F1) → Right click twice → Network setting.
NC
210 20 98 21
255 255 255 0
PC name: (Just enter the host name)
Connection directory name: WT → Page turning key
Workgroup MSHOME
User CNC → Confirm → Restart the system.
If you need more information of Syntec 60WE/60CB operation process welcome to contact us at anytime!
We produce professional ATC CNC Router , ATC CNC Machine RSKM25-H
ATC CNC Router RSKM25-A/RSKM25-H
1. Setting of workpiece centering coordinate system in ATC CNC Machine :
Machine setting → Set workpiece coordinate system → Left and right keys
Set the workpiece coordinate system (F5) → Centering function (F5) → Press F1 (PX1) when the tool touches the workpiece edge in the (- X) direction → Press F2 (PX2) when the tool touches the workpiece edge in the (+X) direction → Press F3 (PY1) when the tool touches the workpiece edge in the (- Y) direction → Press F4 (PY1) when the tool touches the workpiece edge in the (+Y) direction → Left function key → G54 → Auxiliary automatic setting (F3) → Confirm (F1).
2. Inspection G54
Centering function (F5)
For G54 Z-axis
Mechanical coordinate automatic setting (F1) → OK (F1).
Set Z-axis offset
Enter a numeric value → ENTER.
3. Positioning coordinates at a certain point in ATC CNC Machine RSKM25-H:
Move the cursor to G54X → Automatic setting of mechanical indicators (F1) → OK (F1).
Move the cursor to G54Y → Automatic setting of mechanical indicators (F1) → OK (F1).
4. Return to the original point:
Move Z - X+Y+
5. Transfer procedure:
Program editing (F2) → File management (F5) → Disk drive input → Left and right cursor keys → ENTER → OK (F1).
6. Adjustment procedure:
Cursor movement → ENTER → Left and right keys → Execute machining → Automatic execution (main function area) → Manual simulation → Start.
7. Processing parameter setting:
Find breakpoint line number → Execute machining → Processing parameters → Enter numerical value → ENTER → Manual simulation → Start → Confirm (F1).
Manual Data Input (MDI)
8. Procedure:
1). Turn the mode knob to "MDI"
2). Press the following function key "Execute machining"
3).Press the function key "MDI input" several times
4).The MDI input dialog box will appear on the screen
5). Enter the desired program line and press the "MDI" key
6). Press "Start" on the second operation panel to run the current single program
"If the current single section program syntax is incorrect, the program will disappear from the screen as the program executes.".
7). MDI coordinate reset
8). Networking Settings
Parameter setting (F1) → Right click twice → Network setting.
NC
210 20 98 21
255 255 255 0
PC name: (Just enter the host name)
Connection directory name: WT → Page turning key
Workgroup MSHOME
User CNC → Confirm → Restart the system.
If you need more information of Syntec 60WE/60CB operation process welcome to contact us at anytime!
We produce professional ATC CNC Router , ATC CNC Machine RSKM25-H
ATC CNC Router RSKM25-A/RSKM25-H
Leave a Reply
Your email address will not be published.Required fields are marked. *